LABEL DISPENSER
Rapid Easy
Apply labels precisely and quickly
Label dispenser for precise and reliable application
Basic concept of the label dispensers:
Precise and reliable marking
The label dispensers of the Rapid Easy model series are ideally suited for use in industrial environments due to their robust mechanical construction. The systems apply pre-printed labels quickly and accurately to products or their packaging. The label dispensers are suitable for many labelling requirements. Thanks to its compact design, the Rapid Easy is particularly space-saving and can be easily integrated into any production line.
Flexibility due to modular design
The modular design of the systems was the focus during the development of the label dispenser. Almost every label requirement can be realised due to the modular system.
The systems are available with 100 mm and 160 mm and each as (right) RH and (left) LH version.
Model Rapid Easy
Model:
Rapid Easy 100
Rapid Easy 160
100 mm opening width
160 mm opening width
as LH- and RH system available
as LH- and RH system available
Technical data:
Direction of rotation:
Dimensions:
Weight:
Opening width:
Dispensing speed:
Stop accuray:
Min. label length:
Min. label width:
Min. label spacing:
Max. label roll diameter:
Max. label roll weight:
Motor:
Drive system:
Operation temperature:
Air humidity:
Noise:
Control system:
Mains voltage:
Fuse:
Power consumption:
Certification:
IP Protection:
Left- and right-hand version
L: 400 mm x H: 630 mm x B: 280 mm
15 kg
100 mm | 160 mm
25 m/min | 20 m/min
+/-0,5 mm
10 mm
12 mm
2 mm
300 mm
max. 10 kg
5 ph. Stepper motor Steps 1,9 Nm
5-phase stepper motor
+5 bis +40 C
15-90 %, non-condensin
<70 dBA
Microprocessor
230 V, 50/60 Hz
2 AT (230 V)
100 VA
CE
IP44 (optional IP54)

Available application modules and equipment:
Dispensing edge:
-
Dispensing edge with pressure roller | scraper brush
Adapter
-
Stamp adapter
-
Magnetic adapter
Equipment:
-
adjusting units and sensors