Dieselstraße 18, D-64760 Oberzent

+49 6068 9310 0


© 2019 by b+b Automations- und Steuerungstechnik GmbH


Top labelling of flat products

postcards |flat state cartons

The purpose of this machine is the labelling or printing of flat products such as postcards, flat folding boxes, envelopes, mailing envelopes, single sheets or textile blanks, independent of format parts. 


The products are fed into the feeder by the operator and are then destacked layer by layer from below and guided along the labelling, printing or control unit. The system can be continuously refilled during operation. The finished products are then brought together in a discharge chute or collection box. The system is available for different product widths (here max. product width 350 mm).


This system was developed for a performance range of up to 100 products/min. The HSF model series is available for processing higher quantities/min.


In addition to a longer conveying section for setting up different stations, it also offers the option of product ejection to automatically remove NIO products from the process and collect them in a separate collection box. All expansion stages are available either with label dispensers and/or with printing and dispensing units.

HSFeco - Labelling of flat products
HSFeco - Labelling of flat products - e.g. post cards | flat state cartons | envelopes

Product examples:

flat folding boxes, textile blanks, paper blanks, cardboard blanks, envelopes, mailing envelopes, postcards, sheet products, flat state cartons

The tool-less adjustment enables the shortest possible changeover times for batch and product changes. Different application methods ensure optimum labelling results on your products.


Are you looking for a uniform cross-device print data management tool? - Take a look at our label design and automation tool LabelsPlatform 4

  • Facebook - Grau Kreis
  • YouTube - Grau Kreis
  • LinkedIn - Grau Kreis
  • Instagram - Grau Kreis