Integrations of CAB Hermes+ and Hermes Q
Clever and well thought-out technology characterizes the devices from the manufacturer CAB. But especially with regard to integration, compliance with industry standards and consideration of plant safety and the integration of the devices into a line requires more than just providing or adding to existing transport systems. According to the Machinery Directive, the operator of the system is responsible for the safety of the system and therefore relies on the manufacturer's documentation. However, he cannot readily confirm conformity with the necessary machine directives, since he is generally not informed about the final intended use of the system.
As a certified CAB contract and service partner, we also offer our know-how to other CAB partners and integrate their provision into the customer and product-specific solutions we develop. As an integrator, we consider the entire system safety and, in addition to the documentation, we also provide the CE declaration of conformity required for the operation of the system with the delivery of the system in accordance with the currently applicable Machinery Directive 2006/42/EC available, which further confirms compliance with the standards DIN EN ISO 12100: 2010 and DIN EN 60204-1 (VDE 0113-1):2007-06.
Here you will find an excerpt of systems that have already been installed - if you do not find what you are looking for here, please contact us!
Integration in labelers for wrap-around labelling
Model VRM-DS-2PA - Project Description
Fully automatic labeling of cylindrical products on the circumference and on the lid (lid label aligned with the side label)
Printer type: CAB Hermes+ 4L/300-3 with ribbon save
Number: 2
Applicators: 1 x tamp on (top)
1 x vacuum belt (side)
Products: Bottles | Cans | glasses
VRM-DS-2PA - Application video with wrap-around and lid labeller (printing modules with thermal transfer ribbon saving function)
Integration with labelers for top labeling
HSF eco
Fully automatic labeling of flat postcards from magazine to magazine in the friction feeder
Printer type: CAB Hermes+ 4L/300-2
Number: 1
Applicators: 1 x wipe on
Products: Postcards| folding boxes | bags
HSFeco - application video for labeling flat products in the feeder
Detached from the carrier material - with vacuum belt
Features and Options
The VCB enables the labels to be applied separately from the carrier material in order to compensate for either uneven product surfaces or different transport speeds of the product. Even if the product stops during the labeling process and is transported on again, the label application works perfectly, since the peeling speed of the label determines the initial contact between the label and the product.
The module is equipped with a stepper motor, a label stop sensor on the dispensing edge, a sponge rubber roller or brush to reroll or brush the label after it has actually been applied, and its own microprocessor control to be able to process different recipes and formats on the system without changeover times.
The vacuum tape is available in different lengths (depending on the maximum label length).
Installation position:
horizontal Vertical
top labeling