b+b automation > Machines > Labeling machines > Model series M-TE 80
Manual seal labeling
The manual label dispenser was developed for folding boxes in small batches with one or more To provide seal labels - before fully automatic lines are converted to the product, the products are already sealed with this device.
The seal label can be attached to all closure flaps as required. The devices are available for 2 different label roll diameters. An ultrasonic fork sensor enables the processing of transparent and non-transparent sealing labels. Labels are rolled on corners cleanly and accurately.
Another model in our M series is the M-FSM table-top device for manual loading of flat folding boxes and subsequent printing with an inkjet system. Depending on the printer configuration, the unit can also be used to serialize small batches in the pharmaceutical or cosmetics industry. The printed data can then be verified with the optional installation of a camera system.
The solution for smaller, decentralized labeling jobs:
-
ideal table label dispenser
-
reliable, handy with handle bar
-
non-slip stand
-
also suitable for transparent labels
-
easy conversion to other formats
-
repeatable application of labels from product to product
-
inexpensive solution
Manual labeller for cartons and folding boxes
Manual labeller M-TE 80/200
Products
folding boxes of all kinds
Ø label rolls
up to 200mm
M-TE80/200.2
Video about the model M-TE 80/200
Manual labeller M-TE 80/300
Products
folding boxes of all kinds
Ø label rolls
up to 300mm
M-TE80/300.2
Video about the model M-TE 80/300
